A 16-input / 16-output relay unit for capturing external contact states and controlling external devices
- Provides 16 input contacts, 16 output contacts, and 1 device-fault contact (form-B, 2 poles).
- The server PC and the unit are connected over an IP network, so the unit can be operated remotely via the Internet (telnet).
- A built-in DC12V supply is routed to the outside through the contact terminals. Up to 100 mA is available for controlling external devices.
- The watchdog timer function can close a specified contact when communication with the server PC has stopped for a set period.
Specifications
| Product Category | 16-input / 16-output contact model (with DC output power supply for contacts) | |
|---|---|---|
| Product Name | TS CaPID MRLY-1 | |
| Product Model Number | MRLY1-HR-IO16DC | |
| Contact I/F | Input contacts | Phototransistor input D-Sub 37-pin (male) / mounting screws are inch screws |
| Output contacts | Photo-MOS relay output D-Sub 37-pin (female) / mounting screws are inch screws | |
| Control I/F | Rear | DIP switch (temporary IP address initialization at startup) Network (10BASE-T / 100BASE-TX / 1000BASE-T) |
| Operating Temperature, Humidity | 0 to 40℃ | |
| Power Supply | AC100 to 240V | |
| Power Consumption | 10W / 20VA or less | |
| Dimensions (W × H × D) | Rack mount half size 205×43.5×250 mm (excluding protrusions) | |
| Weight | Approx. 1.3kg | |
| Accessories | Power cable (AC100V) Instruction manual Cord clamp | |
| Options | Rack mount support angle U-1 (install 1 unit as 1U) Rack mount support angle U-2 (connect 2 units as 1U) | |
