Accepts a multiplexed BS broadcast TS and outputs a descrambled single TS
- B-CAS descrambling
Supports B-CAS cards for specific business use only. - Retrieval of various information and selection of the broadcast to descramble from a PC
The following operations are available over Telnet.
・Information display: error information (*1), input TS format, TSID list, list of service IDs contained in the selected TSID, TMCC information, etc.
・Selection of the broadcast to descramble: TSID (or relative TS number) and service ID - Selection of the broadcast to descramble using the front panel buttons
The TSID (or relative TS number) and service ID to descramble can be specified. - Information can be checked on the front LCD
Device name, firmware version, IP address, selected TSID and service ID, error information (*1), etc. - Alarm contact output
When an error occurs, the error information (*2) can be output through the contacts. - Two TS outputs
(*1) Input error / TSID selection error / TMCC acquisition error / card error (insertion, communication, contract, type)
(*2) Input error / TSID selection error / TMCC acquisition error / card error (insertion, communication, contract, type) / power supply error (power off)
Specifications
| Product Category | BS-only descrambler | |
|---|---|---|
| Product Name | TS CaPID DSCR-X Descrambler | |
| Product Model Number | DSCR-X | |
| Input/Output | Input I/F | TS input: DVB-ASI × 1 ※ Multiplexed TS or inter-station TS (single TS) ※ Supports input of 204-byte TS packets. ※ Supports packet mode and burst mode input. |
| Output I/F | TS output: DVB-ASI × 2 ※ Output is always in packet mode regardless of the input mode. Contact output: D-Sub 25-pin (female) × 1 ※ Photo-MOS relay contact output | |
| Card I/F | B-CAS card for broadcasters × 1 | |
| Control I/F | Front | Front LED display (selected TSID, service ID being descrambled, status) TSID / service ID selector switch |
| Rear | Network (10BASE-T / 100BASE-TX) Communication port: 10010 Network configuration port: 9999 | |
| Operating Ambient Temperature | 0 to 40℃ | |
| Power Supply | AC100V | |
| Power Consumption | 9W / 17VA or less | |
| Dimensions (W × H × D) | EIA 19-inch rack 1U half size 205×43.5×250 mm (excluding protrusions) | |
| Weight | Approx. 1.3kg | |
| Accessories | Power cable Instruction manual | |
| Options | Rack mount support angle U-1 (install 1 unit as 1U) Rack mount support angle U-2 (connect 2 units as 1U) | |
